The AGV wireless LAN configuration requirements are as follows:
1. Need to assign each terminal (wireless AP, car body wireless client, host, PLC) of the AGV system to a network segment and assign a fixed static IP. Such as 192.168.1.1-192.168.1.254
2. Because AGV and our daily wireless clients (mobile phones, laptops, PDAs, etc.) have very different requirements for network roaming, ordinary wireless clients are basically disconnected and reconnected between APs and APs. Mechanisms. The AGV must be a mechanism for fast roaming at the level of 100 milliseconds between APs. Only in this way can the AGV communicate with the host in real time to ensure traffic control and status update requirements.
Therefore, we strongly recommend the use of MOXA's wireless AP: AWK-1131A, other brands may have the risk of not supporting fast roaming at the level of 100 milliseconds.
3. The wireless AP uses the 2.4GHz frequency band. Please set the channels to 1, 6, and 11, respectively, in a cellular arrangement to prevent co-channel interference between adjacent APs.
4. According to our project experience, the coverage of MOXA's wireless AP: AWK-1131A is 25 meters in radius. If there is a wall, it will be shortened by 50%.
5. The signal strength should be maintained between 30-60dBm.
