Choose AGV control mode

07/29/201913:58:23 Comments 713
Select this key, enter setting interface by pressing confirm. Use up and down key to select PC control or Manual control. For PC control, computer control software will set the vehicle route.For Manual control, operator controls the vehicle and sets route by keys and monitor on the vehicle.
The  default setting is the Manual control, press the confirm key and exit setting when selection accomplished.
Choose AGV control mode

Choose AGV control mode

Station setting
Select this key, enter setting interface by pressing confirm. AGV control software support 8 vehicles to build a AGV system. As for this system has only one AGV, so the default station is 0#, no need for setting.
Gear speed setting
Adjust actual speed of every gear by pressing this key. In this system, the first and forth gear are fixed, which cannot be changed by shifting. The second and third can be adjusted and set to change the actual speed for specific gear.
Button function introduction
To look over all functions of the key on the keyboard by pressing this key. To quit by cancel key after entering.

Map demonstration
To check the AGV route by pressing this key. To quit by cancel key after entering.
Configuration confirmation
To enter duty mode interface by pressing confirm key after all configuration input completed.

Comment

You must beto post a comment.